树莓派LCD驱动

树莓派LCD驱动/2.8/3.2/3.5/3.97/4.3/5/7等！ You can focus on the following GitHub web site, for the latest lcd drivers: https://github.com/goodtft/LCD-show =============================================================================================================== "LCD-show-170315.tar.gz" just for Raspbian (Release date:2017-03-02) or later, DO NOT use it for the Raspbian version before 2017-03-02. ================================================================================================================ "LCD-show-160701.tar.gz" support Raspbian version before Raspbian-2017-02-16,such as(2017-02-16,2017-01-11, 2016-11-25,2016-09-23,2016-05-27,2016-05-10,2016-03-18,or earlier). And This Driver also tesed on "kali-2.1.2" ,"ubuntu-mate-16.04-beta2" ================================================================================================================ How to Install: 1.)Step1, Install Raspbian official mirror a)Download Raspbian official mirror: https://www.raspberrypi.org/downloads/ b)Use“SDFormatter.exe”to Format your TF Card c)Use“Win32DiskImager.exe” Burning mirror to TF Card 2.) Step2, Clone my repo onto your pi git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ 3.)Step3, According to your LCD's type, excute: In case of 2.8" LCD sudo ./LCD28-show In case of 3.2" LCD sudo ./LCD32-show In case of 3.5" LCD sudo ./LCD35-show In case of 3.97" LCD sudo ./LCD397-show In case of 4.3" LCD sudo ./LCD43-show In case of 5" LCD sudo ./LCD5-show In case of 7inch(B)-800X480 RPI LCD sudo ./LCD7B-show In case of 7inch(C)-1024X600 RPI LCD sudo ./LCD7C-show If you need to switch back to the traditional HDMI display sudo ./LCD-hdmi Wait a few minutes,the system will restart automaticall , enjoy with your LCD.