资源简介
电子闹钟,数码管显示,时间日期可设置,闹钟可开关,按键控制。代码有详细注释,绝对可用,有问题可直接联系我!
代码片段和文件信息
/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include “hidef.h“
#include “non_bank.sgm“
#include “runtime.sgm“
#ifndef __HCS12X__ /* it‘s different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__ __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument then no page accesses should occur and
this runtime routine should not be used !
To be on the save side the runtime routines are created anyway.
If some of the -Cp options are given an adapted versions which only covers the
needed cases is produced.
*/
/* if no compiler option -Cp is given it is assumed that all possible are given : */
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__) /* HCS12 family has PPAGE register only at 0x30 */
#define PPAGE_ADDR (0x30+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#define PPAGE_ADDR (0xFF+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1)
#define PPAGE_HIGH_BOUND 0xBFFFu
#define REGISTER_base 0x0u
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_base)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_base)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_base)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE area + 1
*/
#if EPAGE_LOW_BOUND >= EPAGE_HIGH_BOUND || EPAGE_HIGH_BOUND >= DPAGE_LOW_BOUND || DPAGE_LOW_BOUND >= DPAGE_HIGH_BOUND || DPAGE_HIGH_BOUND >= PPAGE_LOW_BOUND || PPAGE_LOW_BOUND >= PPAGE_HIGH_BOUND
#error /* please adapt _GET_PAGE_REG for
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
目录 0 2015-06-28 13:32 Clock\
目录 0 2015-06-28 12:59 Clock\bin\
文件 150095 2015-06-28 13:32 Clock\bin\Project.abs
文件 4422 2015-06-28 13:32 Clock\bin\Project.abs.glo
文件 4402 2015-06-28 13:32 Clock\bin\Project.abs.s19
文件 107968 2015-06-28 13:32 Clock\bin\Project.map
文件 59780 2015-06-25 22:23 Clock\Clock.mcp
目录 0 2015-06-25 10:37 Clock\Clock_Data\
文件 4328 2015-06-28 17:51 Clock\Clock_Data\CWSettingsWindows.stg
目录 0 2015-06-25 10:37 Clock\Clock_Data\Standard\
目录 0 2015-06-25 10:37 Clock\Clock_Data\Standard\ob
文件 13681 2015-06-25 21:18 Clock\Clock_Data\Standard\ob
文件 28606 2015-06-28 13:32 Clock\Clock_Data\Standard\ob
文件 136476 2015-06-25 21:18 Clock\Clock_Data\Standard\ob
文件 5397 2015-06-25 21:18 Clock\Clock_Data\Standard\ob
文件 495224 2015-06-28 17:51 Clock\Clock_Data\Standard\TargetDataWindows.tdt
目录 0 2015-06-25 10:37 Clock\cmd\
文件 1514 2015-06-25 10:37 Clock\cmd\TBDML_Erase_unsecure_hcs12xe.cmd
文件 59 2015-06-25 10:37 Clock\cmd\TBDML_Postload.cmd
文件 60 2015-06-25 10:37 Clock\cmd\TBDML_Preload.cmd
文件 60 2015-06-25 10:37 Clock\cmd\TBDML_Reset.cmd
文件 59 2015-06-25 10:37 Clock\cmd\TBDML_Startup.cmd
文件 77 2015-06-25 10:37 Clock\cmd\TBDML_Vppoff.cmd
文件 78 2015-06-25 10:37 Clock\cmd\TBDML_Vppon.cmd
文件 1036 2015-06-26 20:15 Clock\C_Layout.hwl
文件 161 2004-06-15 14:46 Clock\Default.mem
目录 0 2015-06-25 10:37 Clock\prm\
文件 10141 2015-06-25 10:37 Clock\prm\burner.bbl
文件 5824 2015-06-25 10:37 Clock\prm\Project.prm
目录 0 2015-06-25 10:37 Clock\Sources\
文件 68294 2015-06-25 10:37 Clock\Sources\datapage.c
............此处省略5个文件信息
- 上一篇:专利信息管理系统
- 下一篇:基于.net的图书管理系统论文
相关资源
- 印刷体数字识别openc程序 已测试效果
- 台达DVP的PLC程序密码破解方法
- dsPIC30和dsPIC33系列编程
- 240128驱动c程序
- s7 200plc程序-pid
- 用西门子S7-200编写的恒压供水程序
- 51单片机与PS2鼠标C程序带滚轮识别,
- PID温度控制的PLC程序设计
- 篮球计分器protues仿真+C程序
- 单片机与ADC/DAC的 仿真与程序 资料包
- 基于51单片机温控系统C程序
- 自动售货机的模拟控制plc程序
- PT1000的C程序
- 种子填充算法VC程序.rar
- 华容道横刀立马C程序
- MC9S12xs128最小系统原理图及PCB
- 捷联惯导C程序
- STM32F103 TFT彩屏显示 SPI控制W25X16(外部
- 谭浩强C程序设计第三版清华课件
- DALI协议源代码
- KR的《C程序设计语言》第二版中文版
-
《ob
jective-C程序设计第6版》 - 谭浩强C程序设计完整ppt和程序第五版
- STM32F103 TFT彩屏显示两种模式下的内部
- pic18f25k80-booloader -c程序和can 上位机
- LM4229(LCD240128)显示字符C程序-超帅
- 真正的ATT7022C软件校表c程序,
- BASIC程序设计教程第二版
- 51单片机二氧化碳_温湿度检测C程序
- 谭浩强C程序设计完整ppt和程序第四版
评论
共有 条评论