资源简介
实现将数据通过http协议传输到onenet
代码片段和文件信息
/*
* File : uart.c
* Copyright (C) 2013 - 2016 Espressif Systems
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of version 3 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not see .
*/
#include “ets_sys.h“
#include “osapi.h“
#include “driver/uart.h“
#include “osapi.h“
#include “os_type.h“
// UartDev is defined and initialized in rom code.
extern UartDevice UartDev;
LOCAL struct UartBuffer* pTxBuffer = NULL;
LOCAL struct UartBuffer* pRxBuffer = NULL;
/*uart demo with a system task to output what uart receives*/
/*this is a example to process uart data from taskplease change the priority to fit your application task if exists*/
/*it might conflict with your task if soplease arrange the priority of different task or combine it to a different event in the same task. */
#define uart_recvTaskPrio 0
#define uart_recvTaskQueueLen 10
os_event_t uart_recvTaskQueue[uart_recvTaskQueueLen];
#define DBG
#define DBG1 uart1_sendStr_no_wait
#define DBG2 os_printf
LOCAL void uart0_rx_intr_handler(void *para);
/******************************************************************************
* FunctionName : uart_config
* Description : Internal used function
* UART0 used for data TX/RX RX buffer size is 0x100 interrupt enabled
* UART1 just used for debug output
* Parameters : uart_no use UART0 or UART1 defined ahead
* Returns : NONE
*******************************************************************************/
LOCAL void ICACHE_FLASH_ATTR
uart_config(uint8 uart_no)
{
if (uart_no == UART1){
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U FUNC_U1TXD_BK);
}else{
/* rcv_buff size if 0x100 */
ETS_UART_INTR_ATTACH(uart0_rx_intr_handler &(UartDev.rcv_buff));
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U FUNC_U0TXD);
#if UART_HW_RTS
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U FUNC_U0RTS); //HW FLOW CONTROL RTS PIN
#endif
#if UART_HW_CTS
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U FUNC_U0CTS); //HW FLOW CONTROL CTS PIN
#endif
}
uart_div_modify(uart_no UART_CLK_FREQ / (UartDev.baut_rate));//SET BAUDRATE
WRITE_PERI_REG(UART_CONF0(uart_no) ((UartDev.exist_parity & UART_PARITY_EN_M) << UART_PARITY_EN_S) //SET BIT AND PARITY MODE
| ((UartDev.parity & UART_PARITY_M) <
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
目录 0 2017-11-18 18:41 http_OLED1\
文件 4562 2015-09-20 20:50 http_OLED1\.cproject
文件 832 2015-07-24 16:28 http_OLED1\.project
目录 0 2015-10-27 13:42 http_OLED1\.settings\
目录 0 2017-12-06 19:39 http_OLED1\app\
目录 0 2017-11-18 18:41 http_OLED1\app\.output\
目录 0 2017-11-18 18:41 http_OLED1\app\.output\eagle\
目录 0 2017-11-18 18:41 http_OLED1\app\.output\eagle\debug\
目录 0 2017-11-06 20:20 http_OLED1\app\.output\eagle\debug\bin\
目录 0 2017-12-06 19:38 http_OLED1\app\.output\eagle\debug\image\
文件 516291 2017-12-06 19:38 http_OLED1\app\.output\eagle\debug\image\eagle.app.v6.out
目录 0 2017-11-18 18:41 http_OLED1\app\driver\
目录 0 2017-11-18 18:41 http_OLED1\app\driver\.output\
目录 0 2017-11-18 18:41 http_OLED1\app\driver\.output\eagle\
目录 0 2017-11-18 18:41 http_OLED1\app\driver\.output\eagle\debug\
目录 0 2017-11-18 18:41 http_OLED1\app\driver\.output\eagle\debug\lib\
文件 47932 2017-11-08 13:21 http_OLED1\app\driver\.output\eagle\debug\lib\libdriver.a
目录 0 2017-11-18 18:41 http_OLED1\app\driver\.output\eagle\debug\obj\
文件 1487 2017-11-08 13:21 http_OLED1\app\driver\.output\eagle\debug\obj\uart.d
文件 47248 2017-11-08 13:21 http_OLED1\app\driver\.output\eagle\debug\obj\uart.o
文件 1490 2015-07-03 20:29 http_OLED1\app\driver\Makefile
文件 27380 2015-07-13 09:12 http_OLED1\app\driver\uart.c
文件 3226 2015-05-22 15:09 http_OLED1\app\gen_misc.bat
文件 3276 2015-05-22 15:08 http_OLED1\app\gen_misc.sh
目录 0 2017-11-18 18:41 http_OLED1\app\include\
文件 370 2017-11-16 20:08 http_OLED1\app\include\AM2301.h
文件 673 2017-11-09 13:13 http_OLED1\app\include\client.h
目录 0 2017-11-18 18:41 http_OLED1\app\include\driver\
文件 6232 2015-07-03 20:29 http_OLED1\app\include\driver\uart.h
文件 7038 2015-07-03 20:29 http_OLED1\app\include\driver\uart_register.h
文件 3229 2017-11-16 20:53 http_OLED1\app\include\gpio.h
............此处省略128个文件信息
- 上一篇:MAX31865模块STM32驱动程序
- 下一篇:60KW充电桩电路图
相关资源
- STM32C8T6通过扫描二维码进行智能开锁
- ESP8266微信配网以及公众号绑定
- ESP8266一键烧写工具
- 手机与ESP8266WiFi模块进行通信
- ESP8266搭建MQTT客户端源码
- STM32接入OneNET代码
- STM32-ESP8266-AT
- 毕设-基于ESP8266-12F家电控制系统设计
- 使用MSP432-ESP8266实现小车红外测距和数
- ESP8266_8285_32系列透传固件 JFirmwareESP
- ESP32、ESP8266/85增强型透传固件 JFirmw
- ESP8266-WIFI数据透传
- 基于stm32与esp8266智能家居应用
- ESP8266一键配置app端源码iOS、安卓
- esp8266的AT固件
- STM32F103+ucos-III+ESP8266代码
- ESP8266芯片规格书
- esp8266 AT固件库
- esp8266和24l01基于stm32f103c8t6单片机做的
- ESP8266 post源码 post.zip
- NONOS SDK开发,串口发送、接收与中断
- ESP8266 CP2102版USB转串口驱动win10可用
- E4A打开esp8266LED灯源码
- ESP8266.rar202872
- ESP8266 hspi202465
- esp8266 固件及烧写工具
- esp8266代码
- esp8266网络对时
- 完整工程串口12、DHT11、BH1750、mh-z14
- Esp8266】百万条消息免费之乐鑫esp826
评论
共有 条评论