资源简介
实现飞思卡尔单片机之间的通信,内部涉及很多东西 值得下载
代码片段和文件信息
/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include “hidef.h“
#include “non_bank.sgm“
#include “runtime.sgm“
/*lint --e{957} MISRA 8.1 REQ these are runtime support functions and as such are not meant to be called in user code; they are only invoked via jumps in compiler-generated code */
/*lint -estring(553 __OPTION_ACTIVE__) MISRA 19.11 REQ __OPTION_ACTIVE__ is a built-in compiler construct to check for active compiler options */
#ifndef __HCS12X__ /* it‘s different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__ __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument then no page accesses should occur and
this runtime routine should not be used !
To be on the save side the runtime routines are created anyway.
*/
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__)
#ifndef PPAGE_ADDR
#ifdef __PPAGE_ADR__
#define PPAGE_ADDR __PPAGE_ADR__
#else
#define PPAGE_ADDR (0x30 + REGISTER_base)
#endif
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0xFF+REGISTER_base)
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1u)
#define PPAGE_HIGH_BOUND 0xBFFFu
#ifndef REGISTER_base
#define REGISTER_base 0x0u
#endif
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_base)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_base)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_base)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE are
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
文件 154711 2014-07-09 14:49 CAN发送\bin\Project.abs
文件 1312 2014-07-09 14:49 CAN发送\bin\Project.abs.glo
文件 1300 2014-07-09 14:49 CAN发送\bin\Project.abs.s19
文件 101605 2014-07-09 14:49 CAN发送\bin\Project.map
文件 59224 2014-07-07 18:30 CAN发送\CAN_send.mcp
文件 4271 2014-07-09 15:51 CAN发送\CAN_send_Data\CWSettingsWindows.stg
文件 16760 2014-07-08 15:07 CAN发送\CAN_send_Data\Standard\ob
文件 13629 2014-07-05 15:18 CAN发送\CAN_send_Data\Standard\ob
文件 15576 2014-07-09 14:49 CAN发送\CAN_send_Data\Standard\ob
文件 136480 2014-07-05 15:18 CAN发送\CAN_send_Data\Standard\ob
文件 5153 2014-07-05 15:18 CAN发送\CAN_send_Data\Standard\ob
文件 629577 2014-07-09 14:49 CAN发送\CAN_send_Data\Standard\TargetDataWindows.tdt
文件 1514 2011-11-04 11:15 CAN发送\cmd\TBDML_Erase_unsecure_hcs12xe.cmd
文件 59 2011-11-04 11:15 CAN发送\cmd\TBDML_Postload.cmd
文件 60 2011-11-04 11:15 CAN发送\cmd\TBDML_Preload.cmd
文件 60 2011-11-04 11:15 CAN发送\cmd\TBDML_Reset.cmd
文件 59 2011-11-04 11:15 CAN发送\cmd\TBDML_Startup.cmd
文件 77 2011-11-04 11:15 CAN发送\cmd\TBDML_Vppoff.cmd
文件 78 2011-11-04 11:15 CAN发送\cmd\TBDML_Vppon.cmd
文件 855 2011-11-04 11:15 CAN发送\C_Layout.hwl
文件 161 2004-06-15 15:46 CAN发送\Default.mem
文件 10141 2011-11-04 11:15 CAN发送\prm\burner.bbl
文件 5824 2011-11-04 11:15 CAN发送\prm\Project.prm
文件 69907 2011-11-04 11:15 CAN发送\Sources\datapage.c
文件 262 2011-11-04 11:15 CAN发送\Sources\derivative.h
文件 4578 2014-07-08 15:07 CAN发送\Sources\file\CAN.c
文件 5401 2014-07-08 14:56 CAN发送\Sources\file\CAN.h
文件 4192 2014-07-09 14:48 CAN发送\Sources\main.c
文件 23855 2011-11-04 11:15 CAN发送\Sources\Start12.c
文件 2851 2014-07-09 15:06 CAN发送\TBDML.ini
............此处省略54个文件信息
相关资源
- 在WIN7 64位机Excel 2010安装MSCOMM控件的
- 车规级CAN收发器支持3.3V电平
- ScanPort 多线程源代码
- CAN总线收发器芯片TJA1050T数据手册
- V0.2 版机器人通用底盘协议
- 基于时间触发的CAN通信控制及其应用
- stm32f10x相关库文件 (包含: stm32f10x
- UDS.7z can总线UDS非常棒的
- Log和Canny边缘检测算子
- linux多串口通信,usb-can控制八个电机
- TI-DSP28335-CAN中文使用手册
- 07-模块使用说明_CanTp模块软件使用说
- 03_模块使用说明_CAN恒润科技协议栈
- SuperScan 3.00 汉化精简版
- 页面置换算法 FCFS,SSTF,SCAN和循环
- BOSCH CAN规范V2.0 (中文版CAN协议)
- CAN总线应用 sja1000
- Qt实现周立功CAN
- Breast-Cancer数据集.txt
- stm32f105双CAN协议盒PCB板适用于车载
- 宝马NBT EVO主机开机数据CAN
- abb 变频器canopen使用说明
- 小程序canvas生成海报保存到相册
- wwwscan web扫描器
- USB转CAN总线原理图
- OBD模拟器 OBD诊断开发
- CANopen在伺服电机的应用
- STM32的CAN实验程序
- Bosch CAN总线协议-中文版
- 扫描SCAN算法
评论
共有 条评论