-
大小: 413KB文件类型: .7z金币: 1下载: 0 次发布日期: 2021-06-07
- 语言: 其他
- 标签: Bootloader Freescale 下位机 飞思卡尔
资源简介
Freescale MC9S12XEP Bootloader 下位机,文章地址:https://blog.csdn.net/u010875635/article/details/94593789
代码片段和文件信息
/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include “hidef.h“
#include “non_bank.sgm“
#include “runtime.sgm“
/*lint --e{957} MISRA 8.1 REQ these are runtime support functions and as such are not meant to be called in user code; they are only invoked via jumps in compiler-generated code */
/*lint -estring(553 __OPTION_ACTIVE__) MISRA 19.11 REQ __OPTION_ACTIVE__ is a built-in compiler construct to check for active compiler options */
#ifndef __HCS12X__ /* it‘s different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__ __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument then no page accesses should occur and
this runtime routine should not be used !
To be on the save side the runtime routines are created anyway.
*/
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__)
#ifndef PPAGE_ADDR
#ifdef __PPAGE_ADR__
#define PPAGE_ADDR __PPAGE_ADR__
#else
#define PPAGE_ADDR (0x30 + REGISTER_base)
#endif
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0xFF+REGISTER_base)
#endif
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1u)
#define PPAGE_HIGH_BOUND 0xBFFFu
#ifndef REGISTER_base
#define REGISTER_base 0x0u
#endif
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_base)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_base)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_base)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE are
相关资源
- MPC5744P FreeMaster下位机
- dsPIC33EBootloader下位机
- 51单片机的bootloader实现方法
- i.MX 6Dual/6Quad BSP Porting Guide
- AN3155 STM32 bootloader协议ISP
- MSP430F系列单片机bootloader原理及实现方
- STM32F207的串口_IAPBootloader程序
- freescaleMPC5606sBootLoad
- STC89C52单片机与HC-06模块下位机测试程
- freescale完整程序
- mini2440简易bootloader源码
- 在Freescale iMX28 or iMX515上,移植QT过程
- 28335在线升级bootloader
- STC含下位机通信和上位机贪吃蛇.zip
- pmac编程
- 基于MC9S12XEP100的整车控制器CANBootLoa
- bootloader-lpc1768
- 6713bootloader
- 光功率计 下位机
- 飞思卡尔 MC9S12XEP100 App Demo用于Bootlo
- STM8不用手动复位进入自带Bootloader方法
- MC9S12G128 bootloader
- 安卓wifi客户端与下位机通信
- 基于RFID技术的门禁系统-下位机C51(
- SMT32_iap的bootloader程序
- MC9S12XDP512的CAN编程
- PIC32 bootloader 应用文档中文版
- vs2017开发的上位机接收下位机工程
- CAPL编写的基于UDS的bootloader
- nRF24LE1的通过无线更新固件例程
评论
共有 条评论